IBM Deskstar hard drives Identification Utility description
Operating System:Windows 9x/ME/NT4/2000/XP , 373 Kb
IBM Deskstar hard drives Identification Utility 1.0 Windows 9x/ME/NT4/2000/XP.
The Identification Utility for IBM Deskstar hard drives, will determine if your system is configured with a hard disk drive that needs a firmware update. The utility supports IBM ATA hard drives connected to IDE ports on the motherboard. The IBM Deskstarhard drives supported by IBM Deskstar hard drives Identification Utility 1.0 Windows 9x ME NT4 2000 XP utility have the following model numbers: DTLA-xxxxxx and IC35L0xxAVER07. The xs on the model numbers can represent any number from 0 to 9.If your system is configured with a drive that needs a firmware update, the utility will let you know the firmware level that your drive needs. IBM Deskstar hard drives Identification Utility 1.0 Windows 9x ME NT4 2000 XP Web page has links that will direct you to the appropriate firmware update code needed by your IBM Deskstar hard drive.To identify hard drives that need the firmware update, this utility will search for every hard disk drive connected to the system (Primary Master, Primary Slave, Secondary Master, Secondary Slave), and will provide information such as model, manufacturer, capacity, serial number and current firmware level for each drive detected.NOTE: If your system is configured with more than one IBM Deskstar hard drive, IBM Deskstar hard drives Identification Utility 1.0 Windows 9x ME NT4 2000 XP is possible that more than one of the drives need the update. In such case, download and install the firmware code needed for each of them.
1. Download IBM Deskstar hard drives Identification Utility 1.0 Windows 9x ME NT4 2000 XP and save it to PC hard disk.
2. Run IBM Deskstar hard drives Identification Utility 1.0 and it will install automatic.
3. Reboot your computer to finish your IBM Deskstar hard drives Identification Utility installation.
