NETGEAR FVX538 ProSafe VPN Firewall Firmware 2.1.0 7 Windows 98SE ME 2000 XP

Download NETGEAR FVX538 ProSafe VPN Firewall Firmware 2.1.0 7 Windows 98SE ME 2000 XP

Download Driver Detective to Update your Drivers.

Download Driver Updater Pro to get the most current drivers for your computer.

NETGEAR FVX538 ProSafe VPN Firewall Firmware 7 description

Operating System:Windows 98SE/ME/2000/XP , 7.06 Mb
NETGEAR FVX538 ProSafe VPN Firewall Firmware 2.1.0-7 Windows 98SE/ME/2000/XP.

Bug Fixes:

DHCP IP Assignment doesnt change from low to high

Logs need to be emailed if they become full

Disable QoS priority option if block always action is chosen

RIP MD5 password need to allow shorter than 16 char RFC2453

WAN health/failure detection in Load Balancing - options to select Ping, DNS or None, and also retry count and interval.

If we need to support FQDN in Load balancing mode, we need DynDNS support for both WAN interface

FQDN name containing dash will fail to add the VPN policy

Https inbound rule and remote management are not allowed at same time.

Fail to add a service name with 16 char

WAN fails to connect to PPPoE line

Load Balancing mode can not work for same subnet

Log PPPoE, PPPTP, and dial-up idle timeout events when WAN status logging is enabled.

Need to be able to create overnight schedules

When login after idle timeout previous IP address is displayed.

VPN client can not establish tunnel if inbound rule UDP port 500 is configured. A warning message will be issued.

GUI does not display correct image if restore a config file.

System up time is incorrect during high volume of traffic.

ActiveX not blocked if Cookie blocking is enabled

Spaces not allowed in user names in local user database (for Xauth)

pfkey message is lost due to too many SAs

need to turn off logging of NetBIOS broadcasts

Remote Management fails

Test period and failover after should be grayed out if WAN health/fail detection is none

Problems with port forwarding when wan mode is set to load balancing

Remove Trend Micro Link

WAN port is not responding after upgrade to version 2.x Prior to upgrade, same configuration works fine.

option to enable/disable logging of broadcasts

Beta site reported that there are no notes in the help window for the new VPN auto roll over feature

Need to add help text for load-balancing health detection and new logging options in firewall logs.

New 2007 Daylight Saving Time (DST) implementation.

WAN IP can be set to IP:192.168.2.0 MASK:255.255.255.0 (host portion is ZERO, NETGEAR FVX538 ProSafe VPN Firewall Firmware 2.1.0 7 Windows 98SE ME 2000 XP should be an invalid address)

LAN IP can be set to IP:192.168.1.0 MASK:255.255.255.0 (host portion is ZERO, NETGEAR FVX538 ProSafe VPN Firewall Firmware 2.1.0 7 Windows 98SE ME 2000 XP should be an invalid address), this cause lost control to DUT

Pinging from PC1 to PC2 but there is no reply. (Static Routes)

Once login name has errors such as space, user cannot log in anymore until a reboot is issued to recover. A space in user name is now reported as an error.

After restoring a config file, can not switch from WAN1 only to Load Balancing mode. Get an error invalid configuration. This has been addressed by disabling the Load Balancing option to disallow the user to enter invalid configuration when either WAN1 or WAN2 is configured with idle-timeout option.

The numbers of auto roll-over tests do not work precisely, addressed by preventing user from entering invalid config.

PPPoE LED stays ON when the PPPoE idle time reaches. This happens not often. Most time, LED displays correct behavior.

System Uptime is mismatched between SNMP and web GUI

Unknown error message in DHCP Logs.

Need restarting WAN log message

SNMP timeout

Copyright is displayed incorrectly in Chinese.

New documentation web link due to TrendMicro removal.

VPN between FVS114 and FVX538 initially works fine, but once FVS114 is rebooted and acquired a new IP address, tunnel status is up, but traffic cannot go through.

Earlier firmware allows only 8 users to be added in User Database

FVX538v2 - DYNDNS will not be updated after 30 days

Switch between static IP and DHCP would cause require ISP login

Occasionally the old firmware crashes at boot up.

VPN doesn’t work on WAN2

problems with port forwarding when wan mode is set to load balancing

LPD protocol on TCP port 9100 and RDP protocol on TCP port 3389 work poorly through VPNs

Broadband connection repeatedly drops the WAN interface after dialup backup has been initiated.

Customer reported VPN policy loss if there are special characters in VPN preshare key.

SSL performance was poor.

Account name field inactive.

The dial-up connection takes several minutes to establish the ISP connection vs. less than a minute in v1.x

Dial-up default timeout is 30 seconds.

Fixed some MTU handling issues.

TCP session timeout is changed to 20 minutes; and UDP changed to 3 minutes.

NETGEAR FVX538 ProSafe VPN Firewall Firmware 7 Install

1. Download NETGEAR FVX538 ProSafe VPN Firewall Firmware 2.1.0 7 Windows 98SE ME 2000 XP and save it to PC hard disk.
2. Run NETGEAR FVX538 ProSafe VPN Firewall Firmware 7 2.1.0 and it will install automatic.
3. Reboot your computer to finish your NETGEAR FVX538 ProSafe VPN Firewall Firmware 7 installation.

NETGEAR Network Driver Related Drivers