Nikon D3 Camera Firmware Update 2.02 Mac OS X 10.1.5–10.6.2

Nikon D3 Camera Firmware Update Mac OS X 10.1.5–10.6.2 description

Operating System:Mac OS X 10.1.5–10.6.2 , 15.85 Mb
Nikon D3 Firmware Update 2.02 Mac OS X 10.1.5–10.6.2.

Nikon D3 Camera Firmware Update 2.02 Mac OS X 10.1.5–10.6.2 service provides software for upgrading D3 firmware to v2.02. When performing Nikon D3 Camera Firmware Update 2.02 Mac OS X 10.1.5–10.6.2 firmware upgrade, be sure to upgrade both A and B firmware. Be aware that operation of your D3 is not guaranteed if either A or B firmware is upgraded while the other firmware is not upgraded.

The following improvements have been made in A and B firmware Ver. 2.02:

Auto white balance performance has been improved.

Support for 64 GB memory cards has been added.

When ISO sensitivity settings>ISO sensitivity auto control in the shooting menu is set to On, the Maximum sensitivity option can now be specified in steps of 1/3 EV, 1/2 EV or 1 EV, according to the Custom Setting b1 ISO sensitivity step value setting.

The length of time the camera waits before adjusting focus in response to sudden changes in the distance to the subject can now be selected from 5 (Long) , 4, 3 (Normal), 2, and 1 (Short) from Custom Setting a4 Focus tracking with lock-on. With the increase in the number of options for Custom Setting a4 Focus tracking with lock-on, this item will be set to 3 (Normal) after firmware upgrade. Adjust this setting as needed.

A Dynamic AF area option has been added to the FUNC. button + dials (Preview + command dials, AE-L/AF-L + command dials) item for Custom Setting f4 Assign FUNC. Button (f5 Assign preview button, f6 Assign AE-L/AF-L button).

When AF-ON is selected for Custom Setting a9 AF-ON button or a10 Vertical AF-ON button, the monitor now turns off when the AF-ON button is pressed, even when shooting information is displayed.

When AF-ON is selected for Custom Setting f6 Assign AE-L/AF-L button>AE-L/AF-L button press, the monitor now turns off when the AE/AF lock button is pressed, even when shooting information is displayed.

A Use GPS to set camera clock item has been added to the GPS item in the setup menu. When Yes is selected, date and time information acquired via connection to a GPS device is used to set the camera’s internal clock. After selecting Yes for the first time, turn the camera off and then on again to reacquire GPS data.

When Enable is selected for GPS>Auto meter off in the setup menu, the time until meters turn off is now extended by up to 1 minute to enable camera acquisition of GPS data immediately after the camera is turned on, and immediately after meters turn on. (only with GPS Unit GP-1)

When On is selected for Long exp. NR problems were experienced when shooting at shutter speeds slower than 1 s but faster than or equal to 8 s. This issue has been resolved.

An issue that prevented display of the focus point with playback of images captured with continuous shooting has been resolved.

When some memory cards were inserted in the camera, “CHA” was displayed in the top control panel and images could not be captured. This issue has been resolved.

Precautions for users of Camera Control Pro 2:

These firmware versions are not fully compatible with Camera Control Pro 2 Ver. 2.7.0 and earlier versions. Some of the new menu items will not be available after the firmware has been updated.

Any camera control settings data saved prior to the upgrade cannot be loaded once the new firmware has been installed.

>> Product Information and Specification >> Nikon’s first ever FX format camera enables photographers who work under extreme conditions to stay ahead of the game. The D3 features a highly sensitive 12.1 megapixel CMOS sensor that boasts an extendable ISO range of 200 to 6400, and Nikon D3 Camera Firmware Update 2.02 Mac OS X 10.1.5–10.6.2 is Kevlar/carbon fiber-composite shutter and EXPEED image processing engine enable Nikon D3 Camera Firmware Update 2.02 Mac OS X 10.1.5–10.6.2 to shoot at a staggering 9 fps (11 fps in DX Crop mode). The advanced Scene Recognition System delivers superior exposures and is supported by Nikon’s next-generation 51-point AF system, which offers broad coverage and high sensitivity in low light. Selectable Picture Controls streamline in-camera image processing, saving time in post-production, and a high definition 3-inch LCD screen supports two Live View modes plus an HDMI video output. Protected by a tough, environmentally-sealed magnesium alloy body, the D3 sets the benchmark for professional action photography.

Key Features:

12.1 megapixel FX format CMOS sensor with high signal-to-noise ratio, wide dynamic range and 12-channel readout.

ISO 200 – 6400 : extendable up to 25600 (equivalent) and down to ISO 100 (equivalent).

9fps consecutive shooting (11fps in DX Crop mode)

EXPEED image processing engine with 14-bit A/D conversion and 16-bit image processing for superb tonal gradation.

Advanced Scene Recognition System combines the camera’s metering and AF sensors for precise exposures and sharply defined images.

Multi-CAM3500FX 51-point AF system . Individually selectable or configurable in 9-point, 21-point and 51-point coverage settings.

Picture Controls streamline in-camera image processing by enabling customization of image parameters before capture and offer complete control over sharpening, contrast, brightness, hue and saturation in various color modes.

920,000 dot 3-inch VGA LCD monitor with wide, 170-degree viewing angle.

Live View with Autofocus enables composition of images using the LCD monitor. Two modes are supported: Handheld or Tripod.

Two Crop Modes : DX format and 5:4 ratio. The DX crop mode can be automatically enabled when a DX lens is attached.

Quick response : approx. 37 ms shutter-lag and 55 ms viewfinder black-out.

Highly accurate, durable Kevlar/carbon fiber-composite shutter unit : Standard rating of 300, 000 cycles, with a maximum shutter speed of 1/8,000 sec and flash synchronization at up to 1/250 sec.

Active D-Lighting enables superior high-contrast images by automatically applying tone compensation at the moment of capture.

Dual CF card slots : configurable for parallel (simultaneous) or serial (consecutive) recording.

HDMI video output interface enables connection to high-definition video systems.

Intuitive ergonomics with optimized button placement for fast and comfortable handling.

Durable Magnesium alloy body built to withstand the rigors of the harshest of environments.

Wireless LAN and Ethernet support via optional Wireless Transmitter WT-4.

Nikon D3 Camera Firmware Update Mac OS X 10.1.5–10.6.2 Install

1. Download Nikon D3 Camera Firmware Update 2.02 Mac OS X 10.1.5–10.6.2 and save it to PC hard disk.
2. Run Nikon D3 Camera Firmware Update Mac OS X 10.1.5–10.6.2 2.02 and it will install automatic.
3. Reboot your computer to finish your Nikon D3 Camera Firmware Update Mac OS X 10.1.5–10.6.2 installation.

Nikon Cameras and MP3 Player Driver Related Drivers