SIGMA Digital Camera SD14 Firmware 1.01

Download SIGMA Digital Camera SD14 Firmware 1.01

Download Driver Detective to Update your Drivers.

Download Driver Updater Pro to get the most current drivers for your computer.

SIGMA Digital Camera SD14 Firmware description

Operating System:Firmware , 2.66 Mb
SIGMA Digital Camera SD14 Firmware 1.01.

SIGMA Digital Camera SD14 Firmware 1.01:

Sensor cleaning can now be done by powering the camera from the battery.

Originally, sensor cleaning was only available through the dedicated AC adapter.

If the voltage level of the battery becomes lower than a certain level, the camera will emit a warning beep and will close the cleaning mode. We strongly recommend using a fully charged battery for the sensor cleaning.

If using the camera in A mode with flash photography, the selected shutter speed would either be 1/60 or 1/180sec depending on the focal length.

Now, the optimum shutter speed is selected from the range of 1/60 to 1/180sec.

A slow sync mode has now been added if using the camera in A mode with flash photography. The optimum shutter speed is selected from a range of 30sec to 1/180sec.

Improved image quality when reviewing images on the rear LCD.

Corrects the overexposure issue when using flash with high ISO setting under certain conditions.

Corrects the incompatibility issue with some FAT16 formated large CF cards.

Corrects the phenomenon of the intermittent camera freeze under certain conditions.

Corrects the malfunction of wireless flash with built-in flash under certain conditions.

Corrects the phenomenon that did not save the AdobeRGB setting when changed from sRGB. SIGMA Digital Camera SD14 Firmware 1.01 was the bug in the menu display.

Corrects the phenomenon that the LCD flickered under certain conditions.

Corrects terminology in the Korean menu.

Confirm firmware Version:

Turn on camera power

Press the MENU button on the back of the camera to display the Camera Set-up Menu.

Select Firmware from the Set-up Menu.

Press the OK button to open sub menu and select Current version.

The installed firmware information is displayed. If the version information is Ver.1.00, SIGMA Digital Camera SD14 Firmware 1.01 is necessary to update to SIGMA Digital Camera SD14 Firmware 1.01 new firmware version.

Firmware update steps:

Please use 256MB or larger CF card and format the card in the camera body. To avoid loss of your important data, please check the CF card before formatting.

Please connect CF card reader or SD14 to your computer and click the Download button or right click on the mouse (if you use a Macintosh computer, please press Control + click) to store the firmware file in the CF card root directory (Please do not store in subfolder such as DCIM or IMAGES). If the firmware is downloaded whilst the camera is connected to your computer, please turn off your camera before disconnecting SIGMA Digital Camera SD14 Firmware 1.01 from your computer.

Insert the CF card containing the firmware into your camera and turn on the SD14. (SIGMA Digital Camera SD14 Firmware 1.01 is not necessary to connect the camera body to your computer.)

Press the MENU button on the back of the camera to display the Camera Set-up Menu.

Select Firmware from Set-Up Menu.

Press the OK button to open the sub menu and select Firm update. The Following message is displayed.

Press the OK button again to start the firmware update. (SIGMA Digital Camera SD14 Firmware 1.01 takes about two minutes to update.)

When Firmware update is completed is displayed, the update has finished. Please do not operate the camera until Firmware update is completed is displayed.

Select Firmware from the Set-up Menu and confirm the firmware is updated to Ver.1.01 with Current version. If Ver.1.01 is displayed, the update is complete.

If Firmware update has failed! is displayed during firmware update, please carry out the above installation again. If the update continues to fail, please visit the following technical support page for our World Network contact details. World Network: http://www.sigma-photo.co.jp/english/network/index.htm

SIGMA Digital Camera SD14 Firmware Install

1. Download SIGMA Digital Camera SD14 Firmware 1.01 and save it to PC hard disk.
2. Run SIGMA Digital Camera SD14 Firmware 1.01 and it will install automatic.
3. Reboot your computer to finish your SIGMA Digital Camera SD14 Firmware installation.

SIGMA Cameras and MP3 Player Driver Related Drivers